# Version 3.4.1.149

**Released: 05/22/2001**

NOTES:

The following NEW printers are supported:

Zebra Z6M (203dpi)

Zebra Z6M (300dpi)

 

The following items were CORRECTED:

1 .  Corrected the baud rate list for Sato \'E\' and \'CT\' series
printers so that baud rates up to 57,600 can be selected.

2.   Corrected a problem on Zebra printers where some formats created
in older versions would print a reverse image barcode.

3.   Corrected problem where single digit year fields did not print
correctly on the Apollo printers.

4.   For some barcode symbologies, copying a text field for an Apollo
printer from a barcode field did not copy the check digit character.

5.   Corrected problem that resulted in the loss of some double byte
characters when copying a text field from these symbols.

6.   Fixed problem where the special formatting list was missing some
valid options.

7.   Corrected several problems related to the closing of a network
socket used to print to an IP connected printer.

8.   If a \"when printed\" field used a TrueType font, the edit box was
sometimes not wide enough for all characters to be visible.  The edit
box has been expanded to accommodate larger fonts.

**The following items were CHANGED:**

9.   Changed the Fargo driver to never send an \<STX\>N command to the
printer. This command was only valid in some cases with very old printer
firmware.